This 24" ALFI brand fireclay farm sink is a throwback to a simpler time. Designed to offer the traditional popular look of an apron farm sink with a contemporary twist featuring extra thin walls. Made of the highest quality solid fireclay to ensure it not only looks great but also lasts for a very long time.
The Benefits of an Authentic Fireclay Sink:
-The quality of the finish
- The glazing of the sink surface provides both durability and shine over long periods of time. The raw material used (fine fireclay) allows for uniformity in the finish.
- The sinks glaze is practically impervious to threatening particles from food preparation. Stains do not penetrate the glaze and can be easily wiped away. Acids and chemical cleaners have virtually no adverse effect on this sink. Coffee stains, cigarette burns, and other daily occurrences that would adversely effect kitchen sinks made from other materials are easily wiped away on fireclay sinks.
Features:
Heat resistant up to 350' F. This sink has been tested and will not crack due to heat exposure from a pot / pan up to 350' F hot.
This sink is constructed of solid high-grade fireclay material using high pressure casting, ensuring durability, longevity, and resilience to acids, alkali's, scratches, and chipping. The glazing of the sink surface provides both durability and shine over long periods of time. The raw material used (fine fireclay) allows for uniformity in the finish.
Capable of being installed via Under-Mount (countertop over edge of sink), Top-Mount (countertop lower than top edge of sink), or Flush-Mount (countertop even with sink)
Standard 3 ½ center drain and can be used with a garbage disposal.
Due to the organic nature of the fireclay, material dimensions may vary by 1/8" of an inch. We recommend having the sink on location to trace and measure for countertop and cabinet cut outs. Furthermore , minor imperfections may appear. These are not defects; this is what makes each sink uniquely its own. Defective sinks will not pass our quality control inspection and would be recycled into a new sink at the factory.
It is required to support the sink from beneath. You can use the undermount installation kit (Model #: ABUMSB) to the inner side walls of your cabinet. We then recommend putting plywood on the rods to create a large smooth flat surface. Drill the necessary drain holes. If you did not purchase the kit you will need to create a custom support using 2x4's.
These sinks are not adversely affected by scratches from pots, pans, knifes, etc.
Stainless steel grid shown is sold separately as model # ABGR24
As soon as you place your order, you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorized your credit card for the purchase. As soon as we receive your order, we automatically reach out to our suppliers to confirm that it is in stock and available for immediate shipment. If your item is on backorder or unavailable, we will void the pre-authorization and reach out to you via e-mail. If your item(s) are available for immediate shipment (within 5 business days), we will process the charges and submit the order for shipment.
The standard processing time for an in-stock item is 1-3 business days.
Shipping times vary based on final destination, however the average transit time is 5-10 business days.
Receiving Shipment:
LTL shipments are curbside delivery unless otherwise requested. You will be required to inspect the package upon receipt if there is visible damage. If the visible damage is significant, please refuse the entire shipment. If only a minor part is damaged, accept the shipment and report all issues to Us at returns@thebathvanities.com. Please make sure to note all damages on the Proof of Delivery receipt. All damages must be reported within 48 hours of delivery. Failure to comply this policy disqualifies customers from free replacement of parts.
Return Policy:
In order to issue a refund or replacement, we need to fully inspect the unit. Once the returned item is received and verified to be in “new” condition, a full refund will be issued minus the original freight charges and a 25% restocking fee (if applicable).
ALFI brand ABF2418 24" White Thin Wall Single Bowl Smooth Apron Fireclay Kitchen Farm Sink
No reviews
Vendor
ALFI brand
Sale price
$351.00
Regular price
$600.00
You save 42%
Unit price
/per
FREE Shipping and No Sales Tax (Except WY)! Contact us by phone or email to check eligibility for a personal coupon | Ends:
This 24" ALFI brand fireclay farm sink is a throwback to a simpler time. Designed to offer the traditional popular look of an apron farm sink with a contemporary twist featuring extra thin walls. Made of the highest quality solid fireclay to ensure it not only looks great but also lasts for a very long time.
The Benefits of an Authentic Fireclay Sink:
-The quality of the finish
- The glazing of the sink surface provides both durability and shine over long periods of time. The raw material used (fine fireclay) allows for uniformity in the finish.
- The sinks glaze is practically impervious to threatening particles from food preparation. Stains do not penetrate the glaze and can be easily wiped away. Acids and chemical cleaners have virtually no adverse effect on this sink. Coffee stains, cigarette burns, and other daily occurrences that would adversely effect kitchen sinks made from other materials are easily wiped away on fireclay sinks.
Features:
Heat resistant up to 350' F. This sink has been tested and will not crack due to heat exposure from a pot / pan up to 350' F hot.
This sink is constructed of solid high-grade fireclay material using high pressure casting, ensuring durability, longevity, and resilience to acids, alkali's, scratches, and chipping. The glazing of the sink surface provides both durability and shine over long periods of time. The raw material used (fine fireclay) allows for uniformity in the finish.
Capable of being installed via Under-Mount (countertop over edge of sink), Top-Mount (countertop lower than top edge of sink), or Flush-Mount (countertop even with sink)
Standard 3 ½ center drain and can be used with a garbage disposal.
Due to the organic nature of the fireclay, material dimensions may vary by 1/8" of an inch. We recommend having the sink on location to trace and measure for countertop and cabinet cut outs. Furthermore , minor imperfections may appear. These are not defects; this is what makes each sink uniquely its own. Defective sinks will not pass our quality control inspection and would be recycled into a new sink at the factory.
It is required to support the sink from beneath. You can use the undermount installation kit (Model #: ABUMSB) to the inner side walls of your cabinet. We then recommend putting plywood on the rods to create a large smooth flat surface. Drill the necessary drain holes. If you did not purchase the kit you will need to create a custom support using 2x4's.
These sinks are not adversely affected by scratches from pots, pans, knifes, etc.
Stainless steel grid shown is sold separately as model # ABGR24
As soon as you place your order, you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorized your credit card for the purchase. As soon as we receive your order, we automatically reach out to our suppliers to confirm that it is in stock and available for immediate shipment. If your item is on backorder or unavailable, we will void the pre-authorization and reach out to you via e-mail. If your item(s) are available for immediate shipment (within 5 business days), we will process the charges and submit the order for shipment.
The standard processing time for an in-stock item is 1-3 business days.
Shipping times vary based on final destination, however the average transit time is 5-10 business days.
Receiving Shipment:
LTL shipments are curbside delivery unless otherwise requested. You will be required to inspect the package upon receipt if there is visible damage. If the visible damage is significant, please refuse the entire shipment. If only a minor part is damaged, accept the shipment and report all issues to Us at returns@thebathvanities.com. Please make sure to note all damages on the Proof of Delivery receipt. All damages must be reported within 48 hours of delivery. Failure to comply this policy disqualifies customers from free replacement of parts.
Return Policy:
In order to issue a refund or replacement, we need to fully inspect the unit. Once the returned item is received and verified to be in “new” condition, a full refund will be issued minus the original freight charges and a 25% restocking fee (if applicable).
